Home Microphones Add-Ons Contact
HMHS electronics

hmhs electronics & microphones

 Custom Lo-Fi Modified Microphones  

Telephone Microphone Series

Telephone Microphones

Gas Mask Microphone Series

Gas Mask Microphones

Chest Microphone Series

Chest Microphones

Throat Microphones Series from HMHS electronics

Throat Microphones

Battle Command Microphone Series

BC / CB
Microphones

Contact Microphone Series

Contact Microphones

Adapters Cables Mounts DI Box

Add-On
gear accessories

Noise Toy Nonsense

Noise Toys
+other odd-ends


Andy Tithesis (HMHS Owner)

Andy Tithesis

█ █ █ █ █ █ █

HMHS electronics
Owner / Operator

Pro Faux Pas Musician Not Naught Anti-Artist  •  Los Angeles County Resident

 

Makes art, music, noise, pretentious writings & musings, quips, weird smells, false assumptions and sometimes even a little bit of trouble... though rare. Oh, and also microphones... derp! Using old battle hardened relics from bygone war years and after from theirs to the others and back again becoming ours. Hope that makes sense enough. Anyways ours, this here, that exact exactly thee New or Newest and Greatest Generation Of Gear Swag, HMHSelectronics. Oh like wow! So hit the button(s) boys and girls and take the ride. Get in line to try it. You will most likely, er, like it I guess. Take the steps to be far greater or something like that. Step step step it up. This is fun. Are you having fun? I'm having fun. It's a simple life we were provided and it's a simple life we're leading. Make for good use too. Be sure of it.

  
 



Contact Us

If you have any questions, suggestions, donations, threats or any other super neato ideas, please fill out the form below. would like to put in a custom order...
well you should know what to do below:


* = required fields please




the t-3 chest microphone has never failed me and I thrash about quite a bit. great sound and very durable. get you some hmhs in your life!

Posted by Gladys Harlow on Tuesday, August 13, 2019

I doubt you will find anywhere else this level of quality and guerilla flair in post-futurist audio equipment, created...

Posted by Charlamagne Tension on Sunday, December 2, 2018

See more on our Facebook page


HMHS electronics

Payment received and a receipt has been
sent to your account's email (if applicable).

Transaction details can be viewed at anytime
simply by logging into your PayPal account... derp!

Thank You Kindly

e l e c t r o n i c s



my personal number

HMHSelectronics

currently available microphones built and in-stock

GRM-3 Gas Mask Microphone
GRM-2 HMHS Modified Military Gas Mask Microphone
GRM-4 HMHS Military Gas Mask Microphone by HMHS electronics
BC-1 HMHS Modified Military Battle Alarm Microphone
T-12 Modified WW2 Military Tank Microphone
Spud-1 Lo-fi Re-purposed Handheld Microphone
HMHS electronics The Leech Magnetic Contact Microphone
CK-Ultra HMHS Modified Telephone Bullet Style Microphone
T-3 HMHS Modified Military Chest Microphone
BK-187 HMHS Custom Modified Telephone Microphone
DVH-1 HMHS Military Operator Horn Microphone
BK-BAT HMHS Vintage Bakelite Telephone Custom Microphone
CK-X HMHS Modified Telephone Bullet Style Microphone
BK-Mock HMHS electronics Vintage Bakelite Telephone Microphone
MTM-3 HMHS Mod Military Throat Microphone
MTM-2 HMHS Modified Military Throat Microphone
MTM RECON HMHS Modified Chest Switch and Throat Microphone
JF-1 HMHS Modified Noise Cancelling Pilot's Face Microphone
T-2 HMHS Modified Military Chest Microphone Unit
CB-X2 HMHS Modified CB Radio Microphone
BTK-1 HMHS Custom DIY Handheld Throat Larynx Microphone
MTM-3 HMHS Mod Military Throat Microphone

BC/CB Series

Modified Military Microphones

Spud-1 Microphone
BC-1 HMHS Modified Military Navy Battle Microphone
CB-X2 HMHS Circuit Bent Breaker Microphone Modified
T-12 HMHS Military Tank Microphone Mod
JF-1 Pilot Noise Cancelling Face Mask Microphone

Series

Modified Telephone Microphones

BK-187 • Custom Telephone Microphone
BK-Mock HMHS Modified Working Prop Telephone Microphone
CK-Ultra HMHS electronics Custom Telephone Microphone with PTT
CK-X HMHS Bullet Style Telephone Microphone
BK-BAT HMHS Modified Telephone Bakelite Microphone

MCM Series

Chest Mounted Microphones

T-3 HMHS Mod Military Chest Microphone
Recon MTM HMHS Modified Military Throat Mic & Chest Control Unit
DVH-1 HMHS Custom Military Horn Microphone
T-2 HMHS Military Chest Microphone

MTM Series

Throat-Larynx Microphones

Recon MTM Unit by HMHS electronics
MTM-2 Modded HMHS Military Throat Microphone
MTM-3 HMHS Military Throat Microphone
BTK-1 Original Custom Handheld Throat Microphone

CM Series

Custom Contact Microphones

The Leech with Magnetic Contact Mic by HMHS electronics

DNT Series

Dumb Noise Toys

The Kaslinky Noise Toy by HMHS electronics
Electric Kazoo by HMHS electronics

GRM Series

Gas Mask Microphones

GRM-3 Gas Mask Microphone Mod by HMHS electronics
GRM-4 Gas Mask Microphone Mod by HMHS electronics
GRM-2 Gas Mask Microphone Mod by HMHS electronics

The Kaslinky

Handmade Cacophony Instrument

The Kaslinky Handmade Noise Toy by HMHS electronics

 $20 

Please Choose an option based on location

CANADA


Shipping Is FREE if you are purchasing this with a MICROPHONE within the same order.


Safe Payments Through PayPal

If not use the "BUY IT NOW" option here.

USA


FREE Shipping + ZERO Tax

For USA Ship To Addresses Only


Safe Payments Through PayPal

or

WORLD


Shipping Is FREE if you are purchasing this with a MICROPHONE within the same order.


Safe Payments Through PayPal

If not use the "BUY IT NOW" option here.

Electric Kazoo

Handmade Electric Piezo Kazoo

Electric Kazoo

 $15 

CANADA


Shipping Is FREE if you are purchasing this with a MICROPHONE within the same order.


Safe Payments Through PayPal

If not use the "BUY IT NOW" option here.

USA


FREE Shipping + ZERO Tax

For USA Ship To Addresses Only


Safe Payments Through PayPal

or

WORLD


Shipping Is FREE if you are purchasing this with a MICROPHONE within the same order.


Safe Payments Through PayPal

If not use the "BUY IT NOW" option here.

The Leech

Handmade Magnetic Contact Microphone

The Leech Magnetic Contact Mic
  • Quality 20mm Piezo Discs wired and soldered by hand

  • Very strong Neodymium (Grade: N52) rare earth magnet embedded

  • Built hollow space chamber using a metal ring / sleeve above and surrounding the element for benefit of transducer resonance. Ring also adds weight to insure non shifting when placed as well as adding extra protection to insure greater durability and lifespan.

  • 1/4" TS-Female end plug so you can use your own desired cables of whatever length desired attached to a short quality branded shielded cable

  • Sealed with high strength adhesive before being coated with hot glue and shaped to keep it thick and uniform all around except at intended contact point where it is kept as thin as possible while maintaining level and dexterity

  • Half coated with rubber liquid dip with the other half double shrink wrapped with quality tubing for firm rigid shape

  • Meant to sit securely on a flat surface (non metallic) or attach firmly to any metallic surface regardless of it's plane or contour (well within reason anyways!)

  • BONUS - Includes a pack of 'blue tack' adhesive will be included as well for non metallic surface use

  • Comes with a carrying case as well... oh boy!

 $25 


CANADA

Reduced Shipping + No Tax

USA

Free Shipping + No Tax

WORLD

Reduced Shipping + No Tax

BK-187

Modified Bakelite Telephone Microphone

The Leech • Magnetic Contact Mic
  • PTT Chrome Button (Push-To-Talk)

  • ON / OFF Switch (PTT Button is activated when switch is in OFF mode)

  • Black 18ft. Balanced / Shielded microphone cord

  • XLR or 1/4inch TS (mono) plug

[] Default length. Can be any length you desire within reason at no extra cost just contact us for any special requests. we also have extension adapters as well available upon request
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Comes with two modes you access through the switch in the spine of the phone which we notched out and shaped to help protect and also prevent accidental flips. The first mode is basically OFF but also the mode you use to access the Push-to-Talk chrome plated button which is placed in the front and ergonomically set to be used with your thumb while holding the handle all with one hand. The second mode is basically ON. We have added a volume pot dial on the top and it can be used to control the volume from silence to full volume. The volume pot works for both modes and can be used simultaneously in either one. The BK-187 comes with a 18
foot balanced and shielded hi-quality microphone cable soldered onto an XLR-Male plug. A 1/4" TS jack plug adapter is also included as a bonus for you who plan to plug this straight into FX pedals and/or your guitar amps, etc... et al. Also we use only high grade Kester brand solder and huff fumes at risk of an early death just to be sure your connections stay strong and valid. We make these with intent that they should out live you in your lifetime and be handed down to the next in line of your ilk so as they may think of dear grand______[**] as they raise the Hell like you did as you sit most likely down in the very same. Shaking your grotesque fist up at the surface world swearing curses at the damn youth to turn off the damn raket or face your empty threat you have not the capacity to follow through on. Funny how it all goes in cycles huh? And these mics intend to be there rolling through a few of them anyways. Oi. Get at me with some dirt and I can mail you some love via priority! ☻

BK-BAT Microphone

Also includes:

 $125 

CANADA

Reduced Shipping + No Tax

USA

Free Shipping + No Tax

WORLD

Reduced Shipping + No Tax

BK-MOCK

Modified Vintage Bakelite Dummy Telephone Microphone

BK-Mock Modified Telephone Microphone

I made this for a customer in Europe originally as he wanted a realistic seeming telephone which he could use on stage for a play he was directing which called for a scene with an actor on the telephone obviously. He wanted to hook it up into the theater house PA as well and so I came up with this and he seemed very happy with it so I made another one for fun I guess. It has a PTT (Push-to-talk) button strategically placed where you would naturally hold the handset to talk anyways so it can be engaged without any effort noticed by your audience. If you have one anyways. I'm sure you could use it for non play circumstances as well but I'm not really sure. If someone buys it and tells me I will know I guess. Comes with a balanced XLR plug and about 20 feet of quality microphone cord. The mouthpiece is equipped with a dynamic element taken from the same old vintage telephone you see. The receiver or earpiece end is weighted down to give it a realistic feel but is otherwise a dummy end. Yes you would look like a gangster from the black and white films shouting through this on stage. Okay I'll just stop now. Sorry I got nothing. Neat mic though. I love this vintage crap. Oi.

 $80 

CANADA

Reduced Shipping + No Tax

USA

Free Shipping + No Tax

WORLD

Reduced Shipping + No Tax

BK-BAT

Modified Bakelite Telephone Microphone

BK-BAT Telephone Modified Microphone

Here is a unique one of a kind version of our pseudo Bakelite telephone microphones.
Shaped, hollowed and molded by hand it features a PTT button and an OFF/ON "Bat" style toggle switch.
It has also been hand painted and features an unbalanced cable ending with a 1/4" TS-Male mono plug.
Great for lo-fi noise enthusiasts to use with their gear.
Oh boy!

 $80 

We accept Paypal

via

CANADA

Reduced Shipping + No Tax

USA

Free Shipping + No Tax

WORLD

Reduced Shipping + No Tax

CK-HARP

Modified Telephone Microphone

CK3 Telephone Harp Microphone

"Paisley Green" custom microphone in a vintage telephone shell. Dynamic vintage telephone element capsule. With a high quality plug-in 1/4"TS Mono (Female) input installed. So you can use your own instrument cords of any style and length. Has an adjustable volume pot (w/ high quality metal knob) so you can dial in the right sound levels on the fly. Also serves as an OFF function when fully panned to the side. Sounds great as a lo-fi dirt clod to throw down with any style of music honestly. Trust us... we are filthy animals.

 $80 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


T-3

Modified Military Chest Microphone

HMHS electronics Chest Mic
T-3 Chest Microphone

These come with a newly installed potentiometer for a master volume control at your finger tips for easy dial in control to that sweet spot between feedback and "just a tad more vocal in the monitor" fun. The original heavy duty toggle switch which sits on the chest plate itself also works beautifully as if it just came out the war factory yesterday. The toggle switch has three modes "ON / OFF / ON" which I will attempt to explain using my dyslexic brain. Okay... Down is ON and is locking. Center is OFF. UP is a momentary ON... which means you hold it to talk and when you let it go it snaps back to the center OFF. Basically like a PTT (Push-to-talk) button but it is a switch. Derp! Also included are the original vintage straps which are honestly usually missing when you see these... if you ever do. Rare to get both of them that is for certain. Anyways the first strap is for around the neck & shoulders and the other second strap is for around the waist. They are for doing combat maneuvers like aggressive somersault barrel rolls and flying back spin kicks while maintaining contact with central headquarters at MAS*H 4077th or whatever. Yes I am old... though they were re-runs dammit! Made with shielded and balanced microphone cables usually around 18 feet give or take but I can make it any desired length if you contact after purchase. They come with quality XLR (male) end plugs by default when ordered. Though I can make them with any type of plug you wish really (i.e. 1/4"TS or TRS, Mini-XLR, 3.5mm, etc...) Just contact to place a custom order at no extra cost outside of any specialty parts you may request obviously. If you require a 1/4" TS (mono) as you plan to connect this into FX-pedals or a guitar amp of some kind then I recommend you use the adapter plug which I will include as a bonus with purchase. Though if you want a 1/4"TS installed (as you have your own DI Box or other devious plans towards using the extra noise in the line) instead just contact me using the link at the bottom of the page after purchase and I will gladly oblige. But the "Mono" male unbalanced jack plug adapter works great and that way you have the best of both worlds available for more universal future use. The only drawback I can imagine is a scenario where you have limited space in your gear rig setup possibly but that is it really.

 $100 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


DVH-1

Modified Operator Horn Microphone

DVH-1 • Military Horn Chest Microphone

  • Vintage military radio operator "horn" from over a half century ago and built to last a couple more easy

  • Volume pot for level control at your fingertips w/ ON/OFF switch above

  • Piezo style element housed in Bakelite body portion

  • 15 ft. shielded cable w/ 1/4" TS-M (mono) plug

  • Includes an adjustable neck strap so to float it upon your chest area... yup!*

The DVH-1 is a modified US military radio operator's chest unit with an old operator's horn style microphone. It has a neck strap and so is meant to sit on one's chest with the horn positioned just below the mouth as you can probably imagine. This uses a piezo disc style element which is situated inside the actual Bakelite body at the base of the horn in a hollow space chamber. I also built a small panel control box which is attached on the front of the chest plate unit itself. It has an ON/OFF switch function as well as a small potentiometer which controls the volume by turning the knob. Comes with a 10 foot black instrument cable that is attached with a 1/4" TS male plug. I intended this to plug straight into FX-pedals and/or a guitar amp with gain / EQ settings etc... but you can do as you like. This is an unbalance microphone unit and so it will pick up some noise but you can always add a DI box in between the mic and the intended plug in source to eliminate that problem. You can find them cheap online or also in our ADD-ONS section herein on site. Exciting stuff no doubt.

(
Cord length and plug type can always be changed to meet your needs. Just send me a message after purchase using the contact link at the bottom of the page. Easy stuff my friend. We love you immensely.)

Let me know if you have any further questions or just want to say hello or call me obscene names. I am game. Thank you kindly.

 $90 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


BTK

Handheld Larynx Throat Microphone

BTK • Custom Throat Microphone
  • PTT (Push-to-talk) Chrome Domed Button Switch

  • Handmade Piezo Element w/ Added Spring

  • 1/4"TS (mono) Female Plug Socket

  • Use with any instrument or microphone cord

  • Designed To Be Held To The Throat's Larynx To Amplify Vibrations

This is pretty damn awesome if I am to tell you the truth here. Very proud of it too honestly. It was made on a whim with only what I had before me and it really just came together on it's own. Though to you it may look like some gibbering crack head's jedi light saber or something but dammit you couldn't be farther from the truth on that. I have never done crack and drugs are bad for you. Okay then. It is housed in an aluminum mini flashlight body of which I re-purposed as a mike shaft herein. Duh, that is likely obvious. The inside is wired to a piezo disc that I hand wired and set under pressure with a spring. The top can depress up and down as needed. I have since added a rubber head to the top for comfort and better contact with your greasy neck. Yes we know. ☻

Anyways this is a handmade larynx-phone meant to be placed against your throat to capture your vocal vibrations. A transducer as such when plugged in via a 1/4" TS female socket on the bottom side. Any instrument cord will work. The top has a specially crafted and fitted piezo element upon the underside of the aluminum domed top which is extended by a rubber grommet meant to be held to your neck making contact. It is very fun honestly. The mic also has a Push-To-Talk button.

 $80 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


BC-1

Modified US Navy BC Microphone

BC-1 • Modified Military Battle Alarm Microphone

The US Navy has their own series of microphones used aboard warships primarily to send orders and most importantly, raise the "battle alarm command" over the ship's PA system and it's many loudspeakers situated accros the ship's many hulls, poop decks and other suspiciously salacious named areas which only a long lonely isolated journey at sea for a seaman could explain properly. Kinky. Anyways they are mostly shaped like tuna can's of course and have PTT (Push-to-talk) buttons situated atop usually in which are meant to be depressed down while barking orders at the lower ranks in their funny hats. Though I've never met anyone in the Navy, former or current, whom couldn't swab the decks with my super mouth, er, or: beat the living daylights from out of my equestrian calendar body I should say rather. So don't go all mutinous on me Skippers. I know you don't need spinach to flex on me... anyways this all in good jolly love and respect. For the rest of you here is your chance to be as close to the cut throat bad ass, commanding fear and respect, you will likely ever get. All without hacking off a leg to trade for a fire log and/or poking out a eye in a horrible barroom billiards (aka pool for the dummies) accident while a bit passed drunk with your aggro failed professional athlete but still very competitive spirited friends. Whom always have just a tad too much testosterone flowing for their own mental amplitude too equate without having mercurial rage spots appearing and disappearing throughout the livelong day. (That rant was based on an actual true story I witnessed and I'd bet it's more common occurrence than one would suspect in watering holes across the globe that spins. Just ask your local mixologist or spout monkey, whatever they prefer to be called. If in they are seasoned they should have tales to curl the toenails of dead men. Well someone has to as we all know "dead men tell no...") Just buy the damn microphone please. I promise it will get you booty or at least booed. Anyways see you in Davy Jones' Locker where we'll be mostly snapping each other's bare male bottom's with wet towel ends until the sea cows come home. Oh the huge manatee! Please stop now! Okay then. ☻

 $95 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


JF-1

Modified Pilot Mask Microphone

JF-1 Custom Noise Pilot Microphone Mod

This is a vintage US military microphone produced and issued over a half century ago, give or take (mostly my word! ha.). It was used primarily as a type of isolation microphone so chopper pilot's could communicate hands free and also be well received over the background noise. As helicopters are loud like those satanic devil bands your mom warned you about. Especially the Vietnam ones especially during Operation Wandering Soul. Yes I am a dork. Anyways this has a dynamic style microphone set floating in the face mask hull which I preserved. microphone. Made to attach to a helmet (not included... because you would look stupid) . However the strap seemingly has a second function as a hand just happens to fit perfectly underneath. I have normal hands. The width of my face. Derp. This has also been situated with a metal push button switch. It is locking. Meaning you push it in and it locks and is ON until you go back and push it again. A locking ON/OFF button basically. Okay.

 $80 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


CB-X2

Modified CB Radio Microphone

CB-X2 Circuit Breaker Handheld Microphone

The CB-X2 is a circuit breaker microphone that has been modified, rewired for use as a microphone.
It features a PTT or Push-to-talk button which you hold down to speak... duh.
It has been cleaned inside and out and looks clean and sharp.
This is a heavy duty 'trucker' style microphone compared to most common CB radio mics and has some weight to it.
I bought them off an ex-cop for whatever that's worth.
Comes with a metal clip holder which not only holds but also grounds the mic when not in use.
Sweet stuff.

 $50 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


MTM-2

Military Throat Microphone

MTM-2 Modified Military Throat Microphone

This is a vintage Communist military throat microphone used by the airforce for hands-free and noise-free communication while flying. These are from the USSR / PLA era days of yore. This has been installed with a balanced XLR (male) end plug attached to a three foot (3') microphone cable fully balanced and shielded as well. A custom extension cable which runs from a XLR-Female for another few feet and ends with an external mono 1/4" TS (female) socket end type (*see pics). Basically this was meant to be used in a close proximity set up without intentions to roam while in use. Though an additional balanced XLR cord of near any length can be used to connect (in 'daisy chain' style) if it is desirable without noticeable loss in signal.

Of course you may purchase this and request any set up you want and I will gladly abide so no worries. I just like trying new things as I get bored otherwise.

 $80 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


GRM-2

Military Gas Mask Microphone

GRM-2 • Military Gas Mask Microphone

The GRM-2 is a Polish military gas mask which has been cleverly installed with a vintage telephone dynamic microphone element capsule. As well as a volume pot which has a custom knob made from the shell of a spent bullet casing. Neato indeed.

It comes with a 15 foot cord and 1/4" TS Plug (MONO) or XLR just let me know. Longer or shorter cord lengths are available if you need a custom size. I could also make this with an XLR plug as well. Just add a note during checkout. Thanks and don't hesitate to contact me.

  • Hi-quality Balanced 1/4" TS-Female Plug-in Socket

  • Dynamic Vintage Telephone Element as Microphone Capsule

  • Volume Control & ON/OFF Pot w/ Custom Bullet Shell Knob

  • Industrial Strength Hi-quality Rubber In Composition

  • Rubber Adjustable Strap Harness Means "One Size Fits All"

  • Includes Military Surplus Gas Mask Storage Bag

 $90 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


GRM-3

Military Gas Mask Microphone

GRM-3 • Modified Gas Mask Microphone
  • Hi-quality Balanced 1/4" TS-Female Plug-in Socket

  • Dynamic Vintage Telephone Element as Microphone Capsule

  • Volume Control & ON/OFF Pot w/ Custom Bullet Shell Knob

  • Industrial Strength Hi-quality Rubber In Composition

  • Rubber Adjustable Strap Harness Means "One Size Fits All"

  • Includes Military Surplus Gas Mask Storage Bag

The GRM-3 is a modified GMF-14 Gas Mask produced by GMP Defense Industries. It was designed for the military, police and civil defense industries mainly. So it is obviously built to endure a thrashing or two I guess you could say. Anyways I have given it a new purpose here now by gutting the inner structure carefully enough to install a vintage telephone element from many decades ago but in near pristine, barely used condition. It will likely outlive you as well in function and performance if you don't go full ape-man berserker while using it anyway. This type of dynamic microphone capsule I have chosen to utilize first and foremost for the quality, er, or lack there of, in that it is literally a part of the apparatus which certain music lovers quest towards in obtaining. An application in the function of the vintage lo-fi telephone sound and that sought after nostalgic waveform permitted from such.

Besides the vintage dynamic telephone element used as a microphone here, a potentiometer has been added to control the volume and also act as an ON/OFF control. Exciting I know... it gets better. I have made a custom volume knob from the spent shell casing of a discharged bullet. Neato huh? Well I thought it was anyways. Fitting the aesthetic and theme herein attached but whatever you're into I don't pretend to know too much honestly. Oi. It has also been cleverly, if I am permitted to gleam, with a high quality metal 1/4" TRS Balanced socket plug of the female variety. So as you may use your own or any other's cords or cables applicable. Of whichever desired length you need to utilize in concern to whatever ungodly activity you have planned for usage pertaining to this slick beauty herein. Oi.

 $100 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


GRM-4

Military Gas Mask Microphone

GRM-3 HMHS Gas Mask Microphone Installation
  • Hi-quality Balanced 1/4" TS-Female Plug-in Socket

  • Dynamic Vintage Telephone Element As Microphone Capsule

  • Volume Control Pot w/ Custom Bullet Shell Knob

  • Adult Size Large

  • Includes Military Surplus Gas Mask Storage Bag

The GRM-4 is a Russian made military gas mask which has been cleverly installed with a vintage military grade dynamic microphone element capsule. As well as a volume pot which has a custom knob made from the shell of a spent bullet casing. It also has been fit with a 1/4" TS "female" socket so you can use your own cords. Thanks and don't hesitate to contact me with any questions or custom requests.

 $95 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


SPUD-1

Re-purposed Military Headphone Microphone

Spud-1 Lo-fi Microphone

Converted vintage radio headset pod into a lo-fi dynamic microphone. Sounds terribly nice.

 $40 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


T-12

Modified WW2 Military Tank Microphone

T-12 HMHS Custom Military Tank Microphone Mod

Modified microphone from US military tanker units during World War II and the Korean War days. Also used by other branches as well. This has an over-sized PTT (Push-to-Talk) button which is unique to these units and not seen elsewhere on other military mics as far as I am aware. The bodies were composed using a Bakelite material which was common at the time but has since become rare due to cheaper and more colorfully adaptable materials taking it's place. Thus making Bakelite materials themselves be sought out by some vintage collectors so I've heard. In which case...

 $90 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


T-2

military chest microphone

T-26 Military Chest Microphone Mod
  • Heavy duty ON / OFF / ON (momentary) switch

  • 15 ft. balanced cable w/ XLR plug

  • Dynamic vintage telephone microphone element

US military chest mounted radio / phone from WW2 era. Converted into a lo-fi microphone for modern use with standard equipment. A relic in itself that was made to survive actual wartime conflict. I'd imagine it could survive most any live show one could throw at it then. They don't make them like this anymore as the saying goes.

Rewired toggle switch with 3 positions ON/OFF/ON with the third position ON being momentary in action. It will include either an XLR or 1/4" TS plug. Your choice and if you want both I have adapters available as well. A dynamic element has been installed to replace the original carbon element which needs phantom power and some passive components to work which most do not want to bother with so I swapped it for other vintage parts. If you are interested in the original carbon button please send me a message in the contact area on the main page and we can work it out. I like to communicate directly with everyone I sell a mic to anyways so don't hesitate to contact for anything.

 $90 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


CK-X

telephone bullet microphone

CK-X • Modified Phone Bullet Style Microphone
  • Chrome Domed PTT (Push-to-talk) Button

  • 10 ft. balanced cable w/ XLR plug

  • 1/4" TS Adapter Plug Included

  • Dynamic vintage telephone microphone element

Custom handmade dynamic microphone using a vintage dynamic telephone receiver element (circa 1940's to 1970's generally) as well as a whittled down vintage telephone handset for the body frame. I have also added a Push-to-talk button or PTT switch (others may quack). Comes with a male XLR end plug and a short 8 foot fully shielded microphone cord. A 1/4" TS Mono adapter is also available as an add on for free because I am such a nice guy but you have to ask about it as I am not with an endless supply dammit. But it's there for those whom need it. Amen.

 $80 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


CK-ULTRA

modified telephone bullet microphone

CK-Ultra • Telephone Microphone
  • Domed PTT (Push-to-talk) Chrome Button

  • Volume Control Pot w/ Black Metal Knob

  • 10 ft. balanced cable w/ XLR plug

  • Dynamic microphone element from vintage telephone

  • Hand painted w/ stained wood cable base

Custom handmade dynamic microphone using a vintage dynamic telephone receiver element (circa 1940's to 1970's generally) as well as a whittled down vintage telephone handset for the body frame. I have also added a Push-to-talk button or PTT switch (others may quack). Comes with a male XLR end plug and a short 8 foot fully shielded microphone cord. A 1/4" TS Mono adapter is also available as an add on for free because I am such a nice guy but you have to ask about it as I am not with an endless supply dammit. But it's there for those whom need it. Amen.

 $95 

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


 MTM-3

military throat microphone

MTM-3 • Modified Military Throat Microphone
  • Dynamic type mic capsules specifically produced to capture larynx vibrations

  • Quick release Mini XLR (M) end plug

  • Additional custom made balanced extender cable w/ Mini XLR (F) to a common sized XLR (Male)

Re-modified German military throat microphone circa the last decade or two seemingly. A more modern piece of military equipment with a lightweight feel though undoubtedly still strong and durable. It has a unique folding latch in between the microphone pads allowing the unit to contour to the neck for a more precise fit and feel. As well as allowing it to fold down for easy storage when not in use. The modified cord has been fitted with a Mini XLR male plug. Also included a custom extension cable I made just for this which has a Mini XLR female plug on a balanced 10 ft. Shure cable ending with a regular XLR male plug. An XLR female to 1/4" TS (mono) adapter plug is also included.

$100

CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


MTM-RECON

re-purposed throat microphone
+ modified chest control unit


Recon Throat & Chest Microphone
  • Dynamic type mic capsules specifically produced to capture larynx vibrations

  • Quick release original vintage end plugs for throat mic unit

  • Modified vintage military chest mounted switching unit w/ added Volume and Tone pots

  • Original vintage military shoulder and waist straps

  • Balanced cable wire w/ XLR-Male Plug

  • Carrying bag also included

Re-modified German military throat microphone circa the last decade or two seemingly. A more modern piece of military equipment with a lightweight feel though undoubtedly still strong and durable. It has a unique folding latch in between the microphone pads allowing the unit to contour to the neck for a more precise fit and feel. As well as allowing it to fold down for easy storage when not in use. The modified cord has been fitted with a Mini XLR male plug. Also included a custom extension cable I made just for this which has a Mini XLR female plug on a balanced 10 ft. Shure cable ending with a regular XLR male plug. An XLR female to 1/4" TS (mono) adapter plug is also included.

 $150 


CANADA

Reduced Shipping + No Tax


USA

Free Shipping + No Tax


WORLD

Reduced Shipping + No Tax


ADD-ONS


Only Available With Purchase Of A Microphone

Please Contact If You Have Any Questions.

Mounts/Clips


MC-1
Mic Stand Clip Mount

Microphone Clip Mount

$6


CK-CRADLE
Microphone Mount

CK Cradle Microphone Mount

$20

This is neat and I made it by hand as a challenge to myself to create a microphone holder for the CK and BK series models. Taking que from the telephone cradles of old I used just what I had available to me and came up with this. Pretty sure one of a kind it comes with three mounting screws so you can install it wherever you need easy access to your weapon of choice among the mic of your choice among the said series respectively. Oi.


M-2
Heavy-Duty Microphone Mount

M-2 Heavy Duty Microphone Mount

Heavy Duty Microphone Mount from dead stock a few decades old at least. These were built to last unlike most of it today. It will hold the BK-187 microphone and most the other Telephone Series mics as well. Just contact to be sure or add a note during checkout.

 $20 


M-1
Microphone Stand Mount

Microphone Mount

$7


Magnetic Mount
for CB Mics

CB Radio mic holder with magnetic backing. Made primarily for truck drivers and their ilk. It has two purposes actually. The first to obviously hold the mic when not in use. The second function is this mount also serves to ground the mic properly when not in use. At least the metal ones do and so long as the CB mic itself has a metal hangar attachment on the back of the unit. These are vintage dead stock from the 1960's or 1970's and some are still sealed in the original packaging.
Oh boy Roy!

$10


Adapter Plugs


XLR Female  to  1/4" TS Male
Adapter Plug

XLR-F to 1/4 inch TS-M Adapter

$5


1/4" TS () to XLR () Adapter Plug

1/4 inch TS-F to XLR-F Adapter Plug

$5


1/4"TS  TO  XLR

cable/plug  Adapter

1/4 inch TS-F to XLR-M Adapter

$5


3.5mm-Stereo to XLR-F Adapter Plug

3.5mm Stereo to XLR-F Adapter

$5


RCA-M to XLR-F Adapter Plug

RCA-M to XLR-F Adapter

$5


1/4 inch TS-F to XLR-M Adapter from Vintage Dead Stock

1/4" TS-Female to XLR-Male Adapter Plug

$7


1/4"TS-M to 1/4"TS-M Adapter Plug

1/4 inch TS-M to 1/4 inch TS-M Adapter

$3


1/4" TS Female to 1/4" TS Female Adapter For Extension

1/4 inch TS-F to 1/4 inch TS-F Adapter

$4


Phantom Power
& DI Boxes/Plugs


Phantom Power Box
by NEEWER

  • Input Voltage is 110V (US Standard)

  • Delivers reliable 48V phantom power for condenser microphones and also our carbon button microphone mods (HMHSelectronics)

  • Universal XLR input and output, compatible with all kinds of microphone music recording equipment

  • Single channel unit w/ balanced inputs / outputs to connect mic in-line to mixer or PA board

  • ON/OFF LED power switch

  • Power adapter included. (110v)

  • Includes 10 foot XLR cable with high quality brand name plugs (Male to Female)

  • For live stage and/or studio use and/or whatever

Phantom Power Box Set

$20

These are 110V for US Standard Outlets


KD10 by Groove Plugs
Line Matching Transformer Plug Adapter

Line Matching Transformer (lo-z to hi-z)

This XLR female to 1/4" TS male plug adapter is used to match sound levels
and balance systems from a low impedance device to that of a high impedance device.

$20


DI Box
by
PYLE

This is a passive direct box. An active source needs a passive direct box, while a passive source needs an active direct box. A passive DI box utilizes a transformer which converts the audio signal's impedance level from Hi-Z down to Lo-Z, whereas it will bring it to line level.

A passive direct box will convert an unbalanced signal into a balanced one. Basically letting you split an instrument signal onstage and in the studio. It also has a ground lift switch which will eliminate ground hum if you are using a microphone with an unbalanced 1/4"TS plug being fed to a PA or mixer with XLR plugs at the end of your chain.

You basically want one of these if you are plugging an unbalanced Hi-Z instrument such as many non XLR microphones, guitars, guitar amps (line out), keyboards, 1/4" TS contact mics, etc... into a balanced Lo-Z source such as a PA system, mixer boards, consoles, and so forth. These will be equipped with XLR-Female sockets labeled as "Line In" nearly always with most modern equipment.

The DI box will help greatly eliminate annoying ground hum issues and help reject RF waves and other undesired noise interference from straying electrical power such as wall sockets, fluorescent lights etc. It also allows you to have longer cord lengths in runs between equipment with out signal lose occurring as it is balancing your signal path by way of pin-2 (+) and pin-3 (-) of the XLR plug both running the audio path of the signal and canceling out any noise not in the actual original signals sent.

Honestly look up more info online these are great to have just in case and you can likely find a better deal elsewhere if you look around. Just being honest. Oi.

$20


Custom Cables


1/4" TS male to XLR female
3ft. Cable

1/4 inch TS (male) to XLR (female) 3ft. Cable

$8


1/4" TS Male to XLR Male  1" Cable Adapter

1/4 inch TS-Male to XLR-Male 1 inch Cable

$6


1/4"TS Female
to XLR Female
1ft. Adapter Cable

1/4 inch TS-Female to XLR-Female 1ft. Adaption Cable

$8




HMHS electronics logo

HMHSelectronics

©©© 2017-2020